SNDT to AMR Converter

Turn SNDT sound recordings into AMR online

Drop files here. 1 GB maximum file size or Sign Up
to

Settings

The AMR audio codec supports various bit rates ranging from 4.75 to 12.2 kbit/s with toll quality speech starting at 7.4 kbit/s.
Set the number of audio channels. This setting is most useful when downmixing channels (e.g., from 5.1 to stereo).
Set the sample rate of the audio. Music with a full spectrum (20 Hz — 20 kHz) requires values not lower than 44.1 kHz to achieve transparency. More info can be found on the wiki.

sndt

SNDT is the audio format associated with Sndtool, an early MS-DOS sound utility from the early 1990s that appeared alongside the spread of Sound Blaster cards in PCs. Unlike the headerless Sounder format, SNDT files include a brief header with the sample rate and data length — a meaningful improvement that let playback software determine timing automatically. Audio data is stored as 8-bit unsigned PCM, typically at 8000 to 22050 Hz in mono. Sndtool functioned as a simple waveform recorder and player, often distributed as shareware or bundled with sound card drivers. A key advantage over competing DOS audio formats was this self-describing header, which eliminated the guesswork of playing unfamiliar files — a real problem before standardized multimedia frameworks existed. The format was also efficient to decode, requiring no decompression and minimal CPU overhead on the 286 and 386 processors of the time. SNDT files served as building blocks for early PC games and multimedia presentations, where developers needed reliable audio across the limited Sound Blaster hardware ecosystem. Today, SNDT survives in retro software archives and is supported by SoX for conversion to modern formats.
read more

amr

AMR (Adaptive Multi-Rate) is a compressed audio format optimized for speech, standardized by the European Telecommunications Standards Institute and adopted as a mandatory codec for GSM and 3G mobile networks. The codec dynamically switches between eight bit rates — from 4.75 to 12.2 kbps — depending on network conditions and background noise levels. When link quality drops, the encoder shifts to a lower rate, trading marginal clarity for transmission reliability. This adaptive mechanism is defined by the 3GPP specifications and represents one of the most widely deployed voice codecs globally, used in billions of mobile calls. The primary advantage is compression efficiency: one minute of AMR audio at 12.2 kbps occupies roughly 90 KB, practical for voice memos, voicemail, and MMS on bandwidth-constrained networks. Another benefit is built-in voice activity detection and comfort noise generation, reducing transmission during silence. While AMR is unsuitable for music due to its narrow bandwidth (300-3400 Hz), it excels at delivering intelligible speech under challenging network conditions.
read more
Facebook Amazon Microsoft Tesla Nestle Walmart L'Oreal

Data Protection

Security is built in — uploaded SNDT recordings are deleted instantly after processing, and AMR results are removed within 24 hours.

Accurate Conversion

Audio from SNDT transfers to AMR without unnecessary degradation. The converter respects source encoding and reproduces it faithfully.

Server-Side Work

All the heavy lifting for SNDT to AMR conversion happens on remote servers. Your computer or phone resources remain completely free.

How to convert SNDT to AMR

1

Select files from Computer, Google Drive, Dropbox, URL or by dragging it on the page.

2

Choose amr or any other format you need as a result (more than 200 formats supported)

3

Let the file convert and you can download your amr file right afterwards

About formats

SNDT is the audio format associated with Sndtool, an early MS-DOS sound utility from the early 1990s that appeared alongside the spread of Sound Blaster cards in PCs. Unlike the headerless Sounder format, SNDT files include a brief header with the sample rate and data length — a meaningful improvement that let playback software determine timing automatically. Audio data is stored as 8-bit unsigned PCM, typically at 8000 to 22050 Hz in mono. Sndtool functioned as a simple waveform recorder and player, often distributed as shareware or bundled with sound card drivers. A key advantage over competing DOS audio formats was this self-describing header, which eliminated the guesswork of playing unfamiliar files — a real problem before standardized multimedia frameworks existed. The format was also efficient to decode, requiring no decompression and minimal CPU overhead on the 286 and 386 processors of the time. SNDT files served as building blocks for early PC games and multimedia presentations, where developers needed reliable audio across the limited Sound Blaster hardware ecosystem. Today, SNDT survives in retro software archives and is supported by SoX for conversion to modern formats.
Developer: Sndtool (MS-DOS)
Initial release: 1992
AMR (Adaptive Multi-Rate) is a compressed audio format optimized for speech, standardized by the European Telecommunications Standards Institute and adopted as a mandatory codec for GSM and 3G mobile networks. The codec dynamically switches between eight bit rates — from 4.75 to 12.2 kbps — depending on network conditions and background noise levels. When link quality drops, the encoder shifts to a lower rate, trading marginal clarity for transmission reliability. This adaptive mechanism is defined by the 3GPP specifications and represents one of the most widely deployed voice codecs globally, used in billions of mobile calls. The primary advantage is compression efficiency: one minute of AMR audio at 12.2 kbps occupies roughly 90 KB, practical for voice memos, voicemail, and MMS on bandwidth-constrained networks. Another benefit is built-in voice activity detection and comfort noise generation, reducing transmission during silence. While AMR is unsuitable for music due to its narrow bandwidth (300-3400 Hz), it excels at delivering intelligible speech under challenging network conditions.
Initial release: 1999

Frequently Asked Questions

Why convert SNDT to AMR?

SNDT recordings sit in a dead format that modern systems simply ignore. AMR is optimized for speech recording on mobile devices and widely used for voice memos and telephony applications.

How do I open AMR files?

Open AMR with VLC, QuickTime, or mobile-compatible players. These tools handle the format natively and provide reliable playback.

Is my data encrypted during transfer?

All uploads and downloads use encrypted HTTPS connections. Your SNDT audio and the resulting AMR output are protected throughout the process.

Can I convert multiple SNDT recordings at once?

Yes — upload several SNDT files and convert them all to AMR simultaneously. Batch conversion saves significant time on collections.

Will audio quality degrade during conversion?

Quality depends on the target codec. Lossless formats keep every sample from your SNDT source. Lossy codecs apply minimal compression.

Does the converter work with damaged recordings?

The converter reads whatever audio data is available in the SNDT file. Severely corrupted sections may not transfer, but valid data converts.