MP2 to TTA Converter

Unwrap MP2 audio into high-fidelity TTA online

Drop files here. 1 GB maximum file size or Sign Up
to

Settings

Set the number of audio channels. This setting is most useful when downmixing channels (e.g., from 5.1 to stereo).
Set the sample rate of the audio. Music with a full spectrum (20 Hz — 20 kHz) requires values not lower than 44.1 kHz to achieve transparency. More info can be found on the wiki.
Adjust the audio volume by selecting a number of decibels. For example, -10 dB decreases the volume by 10 decibels.

mp2

MP2 (MPEG-1 Audio Layer II), also known by its original project name MUSICAM, is a perceptual audio codec standardized as part of ISO/IEC 11172-3 in 1993. While its successor MP3 captured the consumer spotlight, MP2 carved out a durable niche in professional broadcasting that it holds to this day. The codec splits audio into 32 sub-bands via a polyphase filter bank, applies a psychoacoustic model to determine masking thresholds, then quantizes and Huffman-codes each sub-band accordingly. Typical broadcast deployments use 192-384 kbps for stereo, yielding transparent quality with lower encoder complexity and better error resilience than Layer III. These properties explain why DVB television, DAB digital radio, and the HDV camcorder standard all mandate or prefer MP2. Encoder latency is shorter too, an important trait for live broadcasting where lip-sync matters. Three advantages keep MP2 relevant decades after standardization: graceful degradation under transmission errors vital for over-the-air signals, minimal encoding delay that suits real-time broadcast chains, and entrenched regulatory acceptance across European and Asian broadcast frameworks.
read more

tta

TTA (True Audio) is a real-time lossless audio compression codec developed by Aleksander Djourik, with its origins tracing back to the early 2000s. The format reconstructs the original PCM stream bit-for-bit upon decoding, guaranteeing that no sonic detail is lost during storage or transfer. TTA handles standard CD-quality audio as well as high-resolution content up to 32-bit integer samples, making it suitable for everyday listening and professional archiving alike. Processing speed is one of TTA's defining strengths — the codec achieves fast encoding and decoding without heavy CPU demands, keeping it lightweight even on older hardware. The file structure supports ID3v1, ID3v2, and APEv2 metadata tags, so track information and album art travel with the audio. Hardware support appeared in several portable players, giving TTA a practical edge over some competing lossless formats. The open-source reference implementation ships under the GNU GPL, encouraging community adoption and third-party integrations. While newer codecs like FLAC have captured a larger share of the lossless audio landscape, TTA continues to serve users who value its simplicity and transparent compression.
read more
Facebook Amazon Microsoft Tesla Nestle Walmart L'Oreal

MP2 to TTA Conversion

Convert broadcast MP2 audio to TTA — bringing your radio recordings into a format suitable for everyday use.

Works Everywhere

Convert audio on any device with a web browser. No platform restrictions — works equally well on phones, tablets, and computers.

Simple Workflow

Three steps — upload, pick a format, download. The intuitive interface guides you through with zero learning curve.

How to convert MP2 to TTA

1

Select files from Computer, Google Drive, Dropbox, URL or by dragging it on the page.

2

Choose tta or any other format you need as a result (more than 200 formats supported)

3

Let the file convert and you can download your tta file right afterwards

About formats

MP2 (MPEG-1 Audio Layer II), also known by its original project name MUSICAM, is a perceptual audio codec standardized as part of ISO/IEC 11172-3 in 1993. While its successor MP3 captured the consumer spotlight, MP2 carved out a durable niche in professional broadcasting that it holds to this day. The codec splits audio into 32 sub-bands via a polyphase filter bank, applies a psychoacoustic model to determine masking thresholds, then quantizes and Huffman-codes each sub-band accordingly. Typical broadcast deployments use 192-384 kbps for stereo, yielding transparent quality with lower encoder complexity and better error resilience than Layer III. These properties explain why DVB television, DAB digital radio, and the HDV camcorder standard all mandate or prefer MP2. Encoder latency is shorter too, an important trait for live broadcasting where lip-sync matters. Three advantages keep MP2 relevant decades after standardization: graceful degradation under transmission errors vital for over-the-air signals, minimal encoding delay that suits real-time broadcast chains, and entrenched regulatory acceptance across European and Asian broadcast frameworks.
Initial release: 1993
TTA (True Audio) is a real-time lossless audio compression codec developed by Aleksander Djourik, with its origins tracing back to the early 2000s. The format reconstructs the original PCM stream bit-for-bit upon decoding, guaranteeing that no sonic detail is lost during storage or transfer. TTA handles standard CD-quality audio as well as high-resolution content up to 32-bit integer samples, making it suitable for everyday listening and professional archiving alike. Processing speed is one of TTA's defining strengths — the codec achieves fast encoding and decoding without heavy CPU demands, keeping it lightweight even on older hardware. The file structure supports ID3v1, ID3v2, and APEv2 metadata tags, so track information and album art travel with the audio. Hardware support appeared in several portable players, giving TTA a practical edge over some competing lossless formats. The open-source reference implementation ships under the GNU GPL, encouraging community adoption and third-party integrations. While newer codecs like FLAC have captured a larger share of the lossless audio landscape, TTA continues to serve users who value its simplicity and transparent compression.
Developer: Aleksander Djourik
Initial release: 2003

Frequently Asked Questions

Why convert MP2 to TTA?

MP2 is a broadcast-era audio codec still used in DAB/DVB radio but rarely by consumer devices. Converting to lossless TTA preserves the decoded broadcast audio for editing, archiving, or mastering.

What programs can open TTA?

Open TTA with foobar2000, VLC, and media players with True Audio codec support.

Does the conversion preserve audio quality?

TTA is a lossless format, so it stores every sample from the decoded MP2 without adding further compression or degradation.

How many MP2 files can I convert at a time?

Upload and convert multiple MP2 files to TTA simultaneously — the batch feature handles them all at once without repeating steps.

Is the conversion private?

Yes — your MP2 is removed from our servers right after processing. TTA output files are automatically deleted within 24 hours.

Is the conversion fast?

Speed depends on the MP2 file size, but most audio conversions to TTA complete within seconds thanks to server-side processing power.