FLAC to OPUS Converter

Encode lossless FLAC into modern OPUS codec online

Drop files here. 1 GB maximum file size or Sign Up
to

Settings

Set the Opus audio bitrate per channel. If set to "Custom", the Opus audio codec supports up to 256 kbit/s per channel with a recommended range of ≥64 kbps.
Set the number of audio channels. This setting is most useful when downmixing channels (e.g., from 5.1 to stereo).
Set the sample rate of the audio. Music with a full spectrum (20 Hz — 20 kHz) requires values not lower than 44.1 kHz to achieve transparency. More info can be found on the wiki.

flac

FLAC (Free Lossless Audio Codec) delivers mathematically perfect audio reproduction at roughly half the size of an uncompressed WAV file. Maintained by the Xiph.Org Foundation and released in 2001, it quickly became the de facto open standard for lossless music archival. The encoder applies linear prediction to model each audio block, then codes the residual through Rice partitioning — exploiting the statistical distribution of prediction errors for strong compression without discarding data. Bit depths up to 32 and sample rates up to 655 kHz are supported, exceeding the requirements of high-resolution recordings. Hardware support is extensive: smartphones, car stereos, Blu-ray players, and virtually every desktop media application decode FLAC natively. Streaming services such as Tidal and Amazon Music use FLAC for lossless tiers, underscoring industry trust in the codec. Three standout benefits make FLAC compelling. First, complete bit-for-bit restoration of the original signal upon decoding. Second, embedded metadata via Vorbis comments and album art keeps libraries organized without sidecar files. Third, open-source licensing means no patents or royalties, removing legal friction for developers and hardware vendors.
read more

opus

Opus is a versatile, open audio codec standardized by the IETF as RFC 6716 in 2012. It fuses two coding approaches — SILK for speech and CELT for music — into one algorithm that blends between them based on content type and bitrate. This hybrid design lets Opus outperform virtually every other codec across a wide range of uses: low-latency voice at 6 kbps, high-fidelity music at 128 kbps, and everything in between. It supports bitrates from 6 to 510 kbps, sample rates up to 48 kHz, and frame sizes as small as 2.5 ms, giving it the lowest algorithmic latency of any mainstream audio codec. Three advantages make Opus especially compelling. It is completely royalty-free and open-source, removing licensing barriers that hold back proprietary codecs. It achieves transparent quality at roughly half the bitrate of MP3 and beats AAC at equivalent rates. And its low latency makes it the mandatory codec for WebRTC, so every modern browser ships with an Opus decoder. WhatsApp, Discord, Zoom, and YouTube all rely on Opus for real-time audio.
read more
Facebook Amazon Microsoft Tesla Nestle Walmart L'Oreal

Best Possible OPUS

Encoding from lossless FLAC gives OPUS the cleanest source material — resulting in superior output at any bitrate setting.

Extreme Efficiency

OPUS dramatically reduces file size while maintaining superb audio quality — a 30 MB FLAC can become a 2-3 MB OPUS file.

Native Browser Support

OPUS plays directly in Chrome, Firefox, and Edge — convert your FLAC library for seamless web-based playback.

How to convert FLAC to OPUS

1

Select files from Computer, Google Drive, Dropbox, URL or by dragging it on the page.

2

Choose opus or any other format you need as a result (more than 200 formats supported)

3

Let the file convert and you can download your opus file right afterwards

About formats

FLAC (Free Lossless Audio Codec) delivers mathematically perfect audio reproduction at roughly half the size of an uncompressed WAV file. Maintained by the Xiph.Org Foundation and released in 2001, it quickly became the de facto open standard for lossless music archival. The encoder applies linear prediction to model each audio block, then codes the residual through Rice partitioning — exploiting the statistical distribution of prediction errors for strong compression without discarding data. Bit depths up to 32 and sample rates up to 655 kHz are supported, exceeding the requirements of high-resolution recordings. Hardware support is extensive: smartphones, car stereos, Blu-ray players, and virtually every desktop media application decode FLAC natively. Streaming services such as Tidal and Amazon Music use FLAC for lossless tiers, underscoring industry trust in the codec. Three standout benefits make FLAC compelling. First, complete bit-for-bit restoration of the original signal upon decoding. Second, embedded metadata via Vorbis comments and album art keeps libraries organized without sidecar files. Third, open-source licensing means no patents or royalties, removing legal friction for developers and hardware vendors.
Initial release: July 20, 2001
Opus is a versatile, open audio codec standardized by the IETF as RFC 6716 in 2012. It fuses two coding approaches — SILK for speech and CELT for music — into one algorithm that blends between them based on content type and bitrate. This hybrid design lets Opus outperform virtually every other codec across a wide range of uses: low-latency voice at 6 kbps, high-fidelity music at 128 kbps, and everything in between. It supports bitrates from 6 to 510 kbps, sample rates up to 48 kHz, and frame sizes as small as 2.5 ms, giving it the lowest algorithmic latency of any mainstream audio codec. Three advantages make Opus especially compelling. It is completely royalty-free and open-source, removing licensing barriers that hold back proprietary codecs. It achieves transparent quality at roughly half the bitrate of MP3 and beats AAC at equivalent rates. And its low latency makes it the mandatory codec for WebRTC, so every modern browser ships with an Opus decoder. WhatsApp, Discord, Zoom, and YouTube all rely on Opus for real-time audio.
Initial release: September 11, 2012

Frequently Asked Questions

Why convert FLAC to OPUS?

OPUS outperforms MP3 and AAC at all bitrates. Encoding from lossless FLAC gives you the best possible OPUS output — perfect for streaming.

What supports OPUS?

All modern browsers (Chrome, Firefox, Edge), VLC, Telegram, WhatsApp, Discord, and Android natively support OPUS playback.

How efficient is OPUS?

OPUS at 128 kbps from FLAC sounds comparable to MP3 at 256 kbps — the codec is remarkably efficient across speech and music.

Can OPUS handle music well?

Absolutely — OPUS excels at both speech and music content, adapting its encoding strategy dynamically to the audio type.

Can I bulk convert?

Upload your entire FLAC library and convert everything to OPUS at once — ideal for building space-efficient music collections.

Is OPUS open-source?

Yes — OPUS is standardized by IETF and completely royalty-free, developed by the Xiph.Org Foundation and Mozilla.

FLAC to OPUS Quality Rating

4.6 (122 votes)
You need to convert and download at least 1 file to provide feedback!