FSSD to SPX Converter

Transform FSSD recordings into SPX quickly online

Drop files here. 1 GB maximum file size or Sign Up
to

Settings

Set the overall output Speex audio bitrate. Designed for human speech encoding, Speex reaches transparency at ultra-low bitrate with a maximum bitrate of 44 kbps.
Set the number of audio channels. This setting is most useful when downmixing channels (e.g., from 5.1 to stereo).
Set the sample rate of the audio. Music with a full spectrum (20 Hz — 20 kHz) requires values not lower than 44.1 kHz to achieve transparency. More info can be found on the wiki.

fssd

FSSD is a raw audio format that originated in the classic Macintosh ecosystem, where Farallon Computing's MacRecorder hardware (1988) stored digitized sound as unsigned 8-bit PCM in resource fork entries tagged with the 'FSSD' type code. In modern audio processing tools such as SoX, FSSD is treated as an alias for the u8 (unsigned 8-bit) raw format — headerless files containing a flat stream of single-byte amplitude samples, where each value from 0 to 255 represents an audio level with 128 as the center point. Because there is no header, playback parameters like sample rate and channel count must be provided externally. The original MacRecorder typically captured at rates up to 22 kHz in mono, though any sample rate is valid when interpreting the raw data. FSSD and its compressed companion format HCOM (which adds Huffman compression to the same underlying data) were the standard audio formats for early Mac multimedia: HyperCard stacks, educational CD-ROMs, and system alert sounds of the late 1980s and early 1990s relied heavily on this encoding. One advantage of the raw FSSD format is trivial parseability — with no container overhead, the audio data begins at byte zero and can be read by any tool capable of processing unsigned 8-bit PCM. The format's historical significance also makes it practically relevant for digital archivists: converting FSSD recordings to modern containers like WAV preserves the original audio content losslessly, since the raw samples only need a header prepended, not any form of transcoding.
read more

spx

Speex is an open-source audio codec purpose-built for speech compression, developed by Jean-Marc Valin under the Xiph.Org Foundation. First released in October 2002, it targets voice-over-IP, conferencing, and any scenario where spoken word needs to travel efficiently over a network. SPX files wrap Speex-encoded audio inside an Ogg container, pairing the codec's speech optimization with Ogg's streaming capabilities. Three sampling rates are supported — narrowband at 8 kHz, wideband at 16 kHz, and ultra-wideband at 32 kHz — along with variable bitrate encoding that adapts in real time to speech complexity. A standout advantage is its patent-free, BSD-licensed nature, which allowed developers to embed it freely in both commercial and open-source products. Speex also bundles acoustic echo cancellation, noise suppression, and automatic gain control, features that rival codecs typically delegate to external libraries. Although its creators officially recommend Opus) as a successor since 2012, Speex remains deployed in legacy VoIP systems, archived recordings, and embedded devices where its lightweight decoder footprint is still valued.
read more
Facebook Amazon Microsoft Tesla Nestle Walmart L'Oreal

Better Compatibility

Moving from FSSD to SPX transitions your audio from an obscure encoding to designed specifically for speech — a significant practical improvement.

Multiple at Once

Got a collection of FSSD recordings? Upload them in one batch and convert the entire set to SPX in a single session.

Easy to Use

Converting FSSD to SPX takes just a few clicks. No software installation, no configuration headaches — just upload and convert.

How to convert FSSD to SPX

1

Select files from Computer, Google Drive, Dropbox, URL or by dragging it on the page.

2

Choose spx or any other format you need as a result (more than 200 formats supported)

3

Let the file convert and you can download your spx file right afterwards

About formats

FSSD is a raw audio format that originated in the classic Macintosh ecosystem, where Farallon Computing's MacRecorder hardware (1988) stored digitized sound as unsigned 8-bit PCM in resource fork entries tagged with the 'FSSD' type code. In modern audio processing tools such as SoX, FSSD is treated as an alias for the u8 (unsigned 8-bit) raw format — headerless files containing a flat stream of single-byte amplitude samples, where each value from 0 to 255 represents an audio level with 128 as the center point. Because there is no header, playback parameters like sample rate and channel count must be provided externally. The original MacRecorder typically captured at rates up to 22 kHz in mono, though any sample rate is valid when interpreting the raw data. FSSD and its compressed companion format HCOM (which adds Huffman compression to the same underlying data) were the standard audio formats for early Mac multimedia: HyperCard stacks, educational CD-ROMs, and system alert sounds of the late 1980s and early 1990s relied heavily on this encoding. One advantage of the raw FSSD format is trivial parseability — with no container overhead, the audio data begins at byte zero and can be read by any tool capable of processing unsigned 8-bit PCM. The format's historical significance also makes it practically relevant for digital archivists: converting FSSD recordings to modern containers like WAV preserves the original audio content losslessly, since the raw samples only need a header prepended, not any form of transcoding.
Developer: Farallon Computing
Initial release: 1988
Speex is an open-source audio codec purpose-built for speech compression, developed by Jean-Marc Valin under the Xiph.Org Foundation. First released in October 2002, it targets voice-over-IP, conferencing, and any scenario where spoken word needs to travel efficiently over a network. SPX files wrap Speex-encoded audio inside an Ogg container, pairing the codec's speech optimization with Ogg's streaming capabilities. Three sampling rates are supported — narrowband at 8 kHz, wideband at 16 kHz, and ultra-wideband at 32 kHz — along with variable bitrate encoding that adapts in real time to speech complexity. A standout advantage is its patent-free, BSD-licensed nature, which allowed developers to embed it freely in both commercial and open-source products. Speex also bundles acoustic echo cancellation, noise suppression, and automatic gain control, features that rival codecs typically delegate to external libraries. Although its creators officially recommend Opus) as a successor since 2012, Speex remains deployed in legacy VoIP systems, archived recordings, and embedded devices where its lightweight decoder footprint is still valued.
Initial release: October 15, 2002

Frequently Asked Questions

What is the benefit of converting FSSD to SPX?

Since FSSD has raw audio format without headers or tagging support, switching to SPX provides very low bitrate capability.

What programs can play SPX?

You can open SPX with VLC, Audacity, Foobar2000, and Speex-compatible VoIP clients.

Will I lose audio quality converting FSSD to SPX?

FSSD stores voice at very low quality. Moving to SPX makes the audio playable everywhere — quality stays consistent with the source.

Does this converter work on mobile devices?

Absolutely. Since conversion happens in the browser, any device with internet access and a modern browser will work.

How long does FSSD to SPX conversion take?

Most conversions finish within seconds. Processing time depends on recording length, but the cloud-based engine handles it quickly.

What if my FSSD recording is very long?

The converter handles recordings of various lengths. For very large or numerous files, premium plans provide extended capacity.