SPX to FLAC Converter

Convert Speex audio into lossless FLAC format online

Drop files here. 1 GB maximum file size or Sign Up
to

Settings

Set the number of audio channels. This setting is most useful when downmixing channels (e.g., from 5.1 to stereo).
Set the sample rate of the audio. Music with a full spectrum (20 Hz — 20 kHz) requires values not lower than 44.1 kHz to achieve transparency. More info can be found on the wiki.
Adjust the audio volume by selecting a number of decibels. For example, -10 dB decreases the volume by 10 decibels.

spx

Speex is an open-source audio codec purpose-built for speech compression, developed by Jean-Marc Valin under the Xiph.Org Foundation. First released in October 2002, it targets voice-over-IP, conferencing, and any scenario where spoken word needs to travel efficiently over a network. SPX files wrap Speex-encoded audio inside an Ogg container, pairing the codec's speech optimization with Ogg's streaming capabilities. Three sampling rates are supported — narrowband at 8 kHz, wideband at 16 kHz, and ultra-wideband at 32 kHz — along with variable bitrate encoding that adapts in real time to speech complexity. A standout advantage is its patent-free, BSD-licensed nature, which allowed developers to embed it freely in both commercial and open-source products. Speex also bundles acoustic echo cancellation, noise suppression, and automatic gain control, features that rival codecs typically delegate to external libraries. Although its creators officially recommend Opus) as a successor since 2012, Speex remains deployed in legacy VoIP systems, archived recordings, and embedded devices where its lightweight decoder footprint is still valued.
read more

flac

FLAC (Free Lossless Audio Codec) delivers mathematically perfect audio reproduction at roughly half the size of an uncompressed WAV file. Maintained by the Xiph.Org Foundation and released in 2001, it quickly became the de facto open standard for lossless music archival. The encoder applies linear prediction to model each audio block, then codes the residual through Rice partitioning — exploiting the statistical distribution of prediction errors for strong compression without discarding data. Bit depths up to 32 and sample rates up to 655 kHz are supported, exceeding the requirements of high-resolution recordings. Hardware support is extensive: smartphones, car stereos, Blu-ray players, and virtually every desktop media application decode FLAC natively. Streaming services such as Tidal and Amazon Music use FLAC for lossless tiers, underscoring industry trust in the codec. Three standout benefits make FLAC compelling. First, complete bit-for-bit restoration of the original signal upon decoding. Second, embedded metadata via Vorbis comments and album art keeps libraries organized without sidecar files. Third, open-source licensing means no patents or royalties, removing legal friction for developers and hardware vendors.
read more
Facebook Amazon Microsoft Tesla Nestle Walmart L'Oreal

Lossless Archival

Decode Speex recordings into FLAC for long-term storage — no further quality degradation occurs in the lossless FLAC container.

SPX to FLAC Instantly

Transform niche Speex files into the universally recognized FLAC format with a few clicks — no technical expertise required.

Secure Processing

SPX uploads are removed immediately after conversion. FLAC results are automatically purged from servers within 24 hours.

How to convert SPX to FLAC

1

Select files from Computer, Google Drive, Dropbox, URL or by dragging it on the page.

2

Choose flac or any other format you need as a result (more than 200 formats supported)

3

Let the file convert and you can download your flac file right afterwards

About formats

Speex is an open-source audio codec purpose-built for speech compression, developed by Jean-Marc Valin under the Xiph.Org Foundation. First released in October 2002, it targets voice-over-IP, conferencing, and any scenario where spoken word needs to travel efficiently over a network. SPX files wrap Speex-encoded audio inside an Ogg container, pairing the codec's speech optimization with Ogg's streaming capabilities. Three sampling rates are supported — narrowband at 8 kHz, wideband at 16 kHz, and ultra-wideband at 32 kHz — along with variable bitrate encoding that adapts in real time to speech complexity. A standout advantage is its patent-free, BSD-licensed nature, which allowed developers to embed it freely in both commercial and open-source products. Speex also bundles acoustic echo cancellation, noise suppression, and automatic gain control, features that rival codecs typically delegate to external libraries. Although its creators officially recommend Opus) as a successor since 2012, Speex remains deployed in legacy VoIP systems, archived recordings, and embedded devices where its lightweight decoder footprint is still valued.
Initial release: October 15, 2002
FLAC (Free Lossless Audio Codec) delivers mathematically perfect audio reproduction at roughly half the size of an uncompressed WAV file. Maintained by the Xiph.Org Foundation and released in 2001, it quickly became the de facto open standard for lossless music archival. The encoder applies linear prediction to model each audio block, then codes the residual through Rice partitioning — exploiting the statistical distribution of prediction errors for strong compression without discarding data. Bit depths up to 32 and sample rates up to 655 kHz are supported, exceeding the requirements of high-resolution recordings. Hardware support is extensive: smartphones, car stereos, Blu-ray players, and virtually every desktop media application decode FLAC natively. Streaming services such as Tidal and Amazon Music use FLAC for lossless tiers, underscoring industry trust in the codec. Three standout benefits make FLAC compelling. First, complete bit-for-bit restoration of the original signal upon decoding. Second, embedded metadata via Vorbis comments and album art keeps libraries organized without sidecar files. Third, open-source licensing means no patents or royalties, removing legal friction for developers and hardware vendors.
Initial release: July 20, 2001

Frequently Asked Questions

Why convert SPX to FLAC?

FLAC preserves all audio data without further compression loss, making it the go-to choice for archiving Speex recordings in a widely supported format.

Is FLAC truly lossless?

Yes — FLAC compresses audio without discarding data. However, quality lost during the original Speex encoding cannot be recovered.

What software supports FLAC?

VLC, foobar2000, Audacity, Winamp, and most modern music players on desktop and mobile handle FLAC without issues.

Will the FLAC file be large?

FLAC files are smaller than WAV but larger than SPX. Expect a moderate size increase since FLAC stores uncompressed audio data.

Can I convert a batch of SPX files?

Upload multiple SPX recordings at once — they are all converted to FLAC simultaneously.

Is the conversion free?

Yes, standard SPX to FLAC conversions are free on convertio.co. Premium plans offer increased throughput.

SPX to FLAC Quality Rating

3.0 (1 votes)
You need to convert and download at least 1 file to provide feedback!