M2TS to OPUS Converter

Extract Opus audio from Blu-ray M2TS video online

Drop files here. 1 GB maximum file size or Sign Up
to

Settings

Set the Opus audio bitrate per channel. If set to "Custom", the Opus audio codec supports up to 256 kbit/s per channel with a recommended range of ≥64 kbps.
Set the number of audio channels. This setting is most useful when downmixing channels (e.g., from 5.1 to stereo).
Set the sample rate of the audio. Music with a full spectrum (20 Hz — 20 kHz) requires values not lower than 44.1 kHz to achieve transparency. More info can be found on the wiki.

m2ts

M2TS (MPEG-2 Transport Stream) is a container format used primarily for multiplexing audio, video, and other data on Blu-ray Disc media. The format is specified as part of the Blu-ray Disc Audio-Video (BDAV) standard developed by the Blu-ray Disc Association, with commercial Blu-ray products launching in 2006. M2TS files wrap content in MPEG-2 transport stream packets with an additional 4-byte timestamp header prepended to each 188-byte packet, resulting in 192-byte packets that enable more precise timing and error recovery during optical disc playback. This extended packet structure helps maintain synchronization when dealing with the variable read speeds inherent to disc-based media. M2TS supports the major Blu-ray video codecs including H.264/AVC, MPEG-2, and VC-1, alongside audio formats such as Dolby TrueHD, DTS-HD Master Audio, and LPCM for lossless surround sound. The container is also used by AVCHD camcorders for recording high-definition footage, making it common in both consumer disc playback and video production workflows. M2TS files preserve chapter markers, subtitle streams, and interactive menu data within the transport stream. Reliable synchronization mechanisms and support for high-quality codecs make M2TS well-suited for archiving high-definition content where preserving full source quality is essential.
read more

opus

Opus is a versatile, open audio codec standardized by the IETF as RFC 6716 in 2012. It fuses two coding approaches — SILK for speech and CELT for music — into one algorithm that blends between them based on content type and bitrate. This hybrid design lets Opus outperform virtually every other codec across a wide range of uses: low-latency voice at 6 kbps, high-fidelity music at 128 kbps, and everything in between. It supports bitrates from 6 to 510 kbps, sample rates up to 48 kHz, and frame sizes as small as 2.5 ms, giving it the lowest algorithmic latency of any mainstream audio codec. Three advantages make Opus especially compelling. It is completely royalty-free and open-source, removing licensing barriers that hold back proprietary codecs. It achieves transparent quality at roughly half the bitrate of MP3 and beats AAC at equivalent rates. And its low latency makes it the mandatory codec for WebRTC, so every modern browser ships with an Opus decoder. WhatsApp, Discord, Zoom, and YouTube all rely on Opus for real-time audio.
read more
Facebook Amazon Microsoft Tesla Nestle Walmart L'Oreal

Next-Gen Audio

Opus outperforms older codecs at every bitrate. Extract M2TS Blu-ray audio with state-of-the-art compression and clarity.

Video to Modern Audio

Pull audio from M2TS and encode in Opus — the codec built for both music and speech with remarkable efficiency.

Secure Process

Your M2TS uploads are deleted after processing. OPUS outputs are automatically purged within 24 hours for your privacy.

How to convert M2TS to OPUS

1

Select files from Computer, Google Drive, Dropbox, URL or by dragging it on the page.

2

Choose opus or any other format you need as a result (more than 200 formats supported)

3

Let the file convert and you can download your opus file right afterwards

About formats

M2TS (MPEG-2 Transport Stream) is a container format used primarily for multiplexing audio, video, and other data on Blu-ray Disc media. The format is specified as part of the Blu-ray Disc Audio-Video (BDAV) standard developed by the Blu-ray Disc Association, with commercial Blu-ray products launching in 2006. M2TS files wrap content in MPEG-2 transport stream packets with an additional 4-byte timestamp header prepended to each 188-byte packet, resulting in 192-byte packets that enable more precise timing and error recovery during optical disc playback. This extended packet structure helps maintain synchronization when dealing with the variable read speeds inherent to disc-based media. M2TS supports the major Blu-ray video codecs including H.264/AVC, MPEG-2, and VC-1, alongside audio formats such as Dolby TrueHD, DTS-HD Master Audio, and LPCM for lossless surround sound. The container is also used by AVCHD camcorders for recording high-definition footage, making it common in both consumer disc playback and video production workflows. M2TS files preserve chapter markers, subtitle streams, and interactive menu data within the transport stream. Reliable synchronization mechanisms and support for high-quality codecs make M2TS well-suited for archiving high-definition content where preserving full source quality is essential.
Initial release: 2006
Opus is a versatile, open audio codec standardized by the IETF as RFC 6716 in 2012. It fuses two coding approaches — SILK for speech and CELT for music — into one algorithm that blends between them based on content type and bitrate. This hybrid design lets Opus outperform virtually every other codec across a wide range of uses: low-latency voice at 6 kbps, high-fidelity music at 128 kbps, and everything in between. It supports bitrates from 6 to 510 kbps, sample rates up to 48 kHz, and frame sizes as small as 2.5 ms, giving it the lowest algorithmic latency of any mainstream audio codec. Three advantages make Opus especially compelling. It is completely royalty-free and open-source, removing licensing barriers that hold back proprietary codecs. It achieves transparent quality at roughly half the bitrate of MP3 and beats AAC at equivalent rates. And its low latency makes it the mandatory codec for WebRTC, so every modern browser ships with an Opus decoder. WhatsApp, Discord, Zoom, and YouTube all rely on Opus for real-time audio.
Initial release: September 11, 2012

Frequently Asked Questions

Why convert M2TS to OPUS?

Opus delivers outstanding audio quality at very low bitrates — better than MP3, AAC, or Vorbis. Ideal for streaming and voice content.

What plays OPUS files?

VLC, Firefox, Chrome, foobar2000, and most modern Android devices play Opus natively. iOS supports it through third-party apps.

How does Opus compare to AAC?

Opus outperforms AAC at low to medium bitrates. At 64 kbps, Opus sounds comparable to AAC at 96 kbps or higher.

Is Opus good for voice?

Opus was designed for both speech and music. It dynamically adapts encoding to the content — excellent for dialogue extraction.

Will conversion be fast?

Audio extraction bypasses video processing entirely. Opus encoding is efficient and completes quickly even for long recordings.